APX1 pH/ORP Controller (Analog output, RS485)
Hãng sản xuất: Daruifuno
Xuất xứ: Trung Quốc
Model: WS-APX1
Mã hàng: APX1-C1Z-A
Danh mục: HMI, Transmitter, Controller
Ứng dụng: Water Quality Measuring
4.890.000 ₫ 4.890.000 ₫
4.890.000 ₫
Chỉ dẫn:
Điền thông tin nhận Báo Giá ngay hoặc chat zalo: https://zalo.me/envimart
Liên hệ: 02877727979 - sales@envimart.vn
Main test object: pH or ORP
Measuring principle:
pH: Glass pH electrode (hydrogen ion concentration index)
ORP: platinum or gold electrode (oxidation reduction potential)
Measuring range/resolution:
pH: 0~14pH / pH: 0.01pH
ORP: ±2000mV / ORP: 1mV
Temperature: -20~150°C / Temperature: 0.1°C
Temperature compensation: Manual/automatic selection
Accuracy: 0.1% of the measuring range (PH: ±0.02pH, ORP: ±2mV), whichever is greater
Stability: 0.05% of measuring range per 24 hours, no accumulation Repeatability: better than 0.1% of the measuring range
Display screen: 3.2-inch LCD display
Instrument operation: PET button panel with 4 buttons
Calibration method:
pH: 3 points, double slope calibration, calibration points can be set freely; ORP: 2-point calibration
On-site comparison for offset correction calibration
Power-off protection: the instrument is powered off, and the set data is permanently retained
Menu password:Six-digit password setting
Relay output: Two settable SPST relays, maximum load 3A/250VAC
Setup objects: including high/low alarms, water temperature or wash controls Protection level:IP66
Operating environment: 0~60°C Storage environment: -20~70°C Instrument dimensions: 100*100*120mm Installation size: 92*92mm
Installation method: cabinet panel installation
Shell Material: Reinforced ABS
Electrical interface: 3 M12*1.5 Glen heads are reserved at the back end of the instrument, and the wire diameter is 3~6.5mm Maximum power: 3W max
Temperature unit: NTC10K/PT1000
System language: English (support customization)
Relay output:
Current output: One settable 0/4~20mA current loop outputs, max load 1000Ω, support long-term calibration
Digital Communications: Two-wire RS485 interface, MODBUS RTU
Thông số kỹ thuật cho APX1 pH/ORP Controller (Analog output, RS485)
| Brand Name | |
|---|---|
| Hãng sản xuất | Daruifuno |
| Xuất xứ | Trung Quốc |
| Specification | |
| Power supply | 100~240VAC hoặc 18~36VDC |
Main test object: pH or ORP
Measuring principle:
pH: Glass pH electrode (hydrogen ion concentration index)
ORP: platinum or gold electrode (oxidation reduction potential)
Measuring range/resolution:
pH: 0~14pH / pH: 0.01pH
ORP: ±2000mV / ORP: 1mV
Temperature: -20~150°C / Temperature: 0.1°C
Temperature compensation: Manual/automatic selection
Accuracy: 0.1% of the measuring range (PH: ±0.02pH, ORP: ±2mV), whichever is greater
Stability: 0.05% of measuring range per 24 hours, no accumulation Repeatability: better than 0.1% of the measuring range
Display screen: 3.2-inch LCD display
Instrument operation: PET button panel with 4 buttons
Calibration method:
pH: 3 points, double slope calibration, calibration points can be set freely; ORP: 2-point calibration
On-site comparison for offset correction calibration
Power-off protection: the instrument is powered off, and the set data is permanently retained
Menu password:Six-digit password setting
Relay output: Two settable SPST relays, maximum load 3A/250VAC
Setup objects: including high/low alarms, water temperature or wash controls Protection level:IP66
Operating environment: 0~60°C Storage environment: -20~70°C Instrument dimensions: 100*100*120mm Installation size: 92*92mm
Installation method: cabinet panel installation
Shell Material: Reinforced ABS
Electrical interface: 3 M12*1.5 Glen heads are reserved at the back end of the instrument, and the wire diameter is 3~6.5mm Maximum power: 3W max
Temperature unit: NTC10K/PT1000
System language: English (support customization)
Relay output:
Current output: One settable 0/4~20mA current loop outputs, max load 1000Ω, support long-term calibration
Digital Communications: Two-wire RS485 interface, MODBUS RTU
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.
Once the user has seen at least one product this snippet will be visible.